Xoro HTC 2233HD - Manual (Page 86)

18 HTC2233HD/2433HD
Engl
ish
Connection
DC 12 V IN
Connect the cable mounted female connector (IEC C13) of
the power cable to the male connector (IEC C14) of the power
adapter. Connect the female coaxial power connector to the
power plug of the TV set. Connect the CEE 7/7 plug with the
wall mounted power outlet.
On the front side you can see a red LED light. The TV set is
now in Stand-By mode. By pressing the POWER button on
the remote control or on the top side of the device the red
LED changes to a green light.
Antenna
The TV set has an analogue and a digital TV Tuner inside. For receiving analogue
TV signals please connect the antenna cable with the RF connector on the HTC TV
set and with the VHF/UHF roof antenna or with a CATV antenna plug.
For receiving digital terrestrial TV signals please connect the HTC TV set with the RF
plug and also with the roof antenna. If no roof antenna is available, please use indoor
aerial.
For activating the analogue TV Tuner, please switch with the INPUT button and
choose in the popup window „ATV“ or “DTV“ for digital terrestrial TV and confirm by
the OK button.
Note:
For getting the best DVB-T reception please uses the roof antenna. If not possible, than you can
connect the HTC TV set with an active indoor aerial.
SCART Input
Audio– and Video signals from a VCR or a setop box can
be transmitted by SCART. Please connect a SCART
cable with the SCART input on the HTC TV set and with
the SCART output on the VCR or setop box.
Press the INPUT button, choose „SCART“ in the popup
window and confirm by the OK button.
HDMI 1 and 2
If you want connect a multimedia device with HDMI like a
game console „PS3“ or a Setop box with the HTC TV set,
you can establish a HDMI connection. Please connect
the HDMI cable on the HDMI1 or HDMI2 interface on the
TV set and the HDMI output of the multimedia device.
Please press the INPUT button, choose „HDMI1“ or „HDMI2“ in the popup window and confirm by
the OK button.