Acer AR160 F1 - Manual (Page 43)

27
Determining drive status
Each HDD carrier features two status LED indicators (see page 3) to
display the hard drive status. If you are replacing a failed HDD,
determine which drive has failed by checking the hot-plug HDD status
indicators.
Removing and installing a hard disk drive
Removing a hard disk drive with carrier
1 Observe the ESD precautions described on page 24.
2 Remove the carrier with failed HDD.
3 Remove the HDD carrier.
(1) Unlock the HDD carrier latch.
(2) Slide the HDD carrier latch to release the lever.
Description
Onboard SATA RAID Green Red
HDD present no access Off Off
HDD access Blink Off
LSI RAID card Green Red
HDD present no access SAS: On
SATA: Off
HDD access Blink
HDD failure On
HDD removal Off Off
HDD insertion and
rebuilding Blink 1Hz
HDD locate Blink 4Hz