Acer AR160 F1 - Manual (Page 94)

4 System BIOS 78
Change Supervisor Password: Select this feature and press <Enter> to
access the submenu, and then type in a new Supervisor Password.
User Access Level: (Available when Supervisor Password is set as above)
Available options are
• Full Access - grants full User read and write access to the Setup
Utility.
• View Only - allows access to the Setup Utility but the fields cannot
be changed.
• Limited - allows only limited .elfis to be changed such as Date and
Time
• No Access - prevents User access to the Setup Utility.
Change User Password: Select this feature and press <Enter> to access
the submenu , and then type in a new User Password.
Clear User Password: (Available only if User Password has been set) This
item allows you to clear a user password after it has been entered.
Password Check: If set to Setup, a password is required to enter the
Setup Utility. If set to Always, the system will prompt for a password at
bootup.
Boot Sector Virus Protection: When Enabled, the BIOS displays a
warning when any program (or virus) issues a disk format command or
attempts to write to the boot sector of the hard disk drive.
System Management Settings
Use this feature to configure System Management settings.