3 options for data transmission, Options for data transmission – Xylem ProLab 1000 User Manual
Page 73
ProLab 1000
Operation
73
ba75576e05
11/2013
4.8.3
Options for data transmission
Via the RS232 interface, you can transmit data to a PC or external
printer. The following table shows which data is transmitted to the
interface in which way:
Note
The following rule applies: Except for the menus, the display content is
generally downloaded to the interface with <PRINT> (displayed
measured values, measurement datasets, calibration records).
Data
Control
Operation / description
Current
measured values
of the connected
sensor
Manual
With <PRINT>.
Simultaneously with every
manual storage process (see
page 62).
automatic, at
intervals
With <PRT
_
>. Then you
can set the transmission
interval.
Simultaneously with every
automatic storage process
(see page 63).
Stored measured
values
Manual
Displayed dataset:
with <PRINT> after recall
from data storage.
All datasets according to the
filter criteria via the Output to
RS232/USB function.
For details, see page 65.
Calibration
records
Manual
Calibration record of a sensor
with <PRINT> (after calling
up from the data storage or at
the end of a calibration
procedure).
after calling up from the data
storage via the Output to
RS232/USB function.
For details, see page 68.
automatic
For the respective sensor at
the end of a calibration
procedure.