West Control Solutions MRC 5000 Controller Manual - Manual (Page 28)

28
TRANSMITTER POWER SUPPLY
Transmitter Power Supply Provides up to 40mA of current at 24VDC
CONSTRUCTION
Enclosure Injection molded Noryl case and cover with acrylic window
NEMA Rating NEMA 3 standard, NEMA 4X future option
Conduit Openings Three openings on the right side
Mounting Panel or wall
Overall Dimensions 14" wide X 14" high X 3.8" deep.
(355.6mm X 355.6mm X 96.5mm)
Panel Cutout 12.7" wide X 12.7" high
(322.58mm X 322.58mm)
Panel Depth 2.5" (63.5mm)
Panel Protrusion 1.3" (33.0mm)
Weight 7 lbs maximum
Retrofit With adaptor plate, will fit Partlow MRC 7000/ARC 4100 cutout
EVIRONMENTAL AND OPERATING CONDITIONS
Operating Temperature 0
°
C to 55
°
C (32
°
F to 122
°
F)
Storage Temperature -40
°
C to 65
°
C (-4
°
F to 149
°
F)
Humidity 10 to 90% RH, non-condensing
Vibration 0.3 to 100 Hz @ 0.2g
Mounting Position Up to 30
°
forward or backward tilt from vertical
Up to 10
°
side tilt from vertical
DIGITAL COMMUNICATONS
Configuration Port TTL levels
Communications Port RS-485 serial communications, Half-duplex
Protocol MODBUS RTU
Bit Rate 9600 bits per second
Parity Odd
Address User configurable - 0 to 247
GENERAL REFERENCE DATA
Data Backup EEPROM for configuration parameters and calibration data
EEPROM for alarm setpoints
Warranty Two years
APPROVALS AND COMPLIANCE
Safety UL Approved for USA - UL 1092, UL 916, and QUXY - File E67237
UL Certified for Canada - CSA Spec 142 - File E67237
CE - Complies with EN 61010-1:1993: Pending
Immunity/Susceptability CE - Complies with EN50082-1992: Pending
Emissions CE - Complies with EN50081-1: 1992 and EN50081-2:1994: Pending
Limit Device FM: Pending