Extron Electronics CTR 8 User Guide - Manual (Page 19)

CTR 8 • Updating Firmware 14
Figure 12. Firmware Loader Screen with the CTR 8 Added
11. If you want to remove a device, do the following:
a. Click the names of the devices to be deleted, to highlight them.
b. Select Edit > Remove Selected Device(s) from the toolbar.
c. On the Remove Device(s) window, select or deselect any devices on the list as desired,
then click Remove.
To remove all devices, select Edit > Remove All Devices from the toolbar.
12. Click Begin. The following indicators show the progress of the update:
z
The Transfer Time section shows the amounts of remaining and elapsed time for the
update.
z
The Total Progress section displays a progress bar with Uploading... above it.
z
In the Devices panel, the Progress column displays an incrementing percentage and
another progress bar. The Status column displays
Uploading .
13. The upload is complete when the Remaining Time field shows 00.00.00 , the Progress
column shows 100% , and Completed is displayed above the progress bar and in the Status
field. Close the Firmware Loader dialog.