Extron Electronics DXP HDMI User Guide - Manual (Page 18)

DXP DVI Pro and DXP HDMI Series • Operation 12
• Room — A subset of outputs that are logically related to each other, as determined
by the operator. The switchers support up to 10 rooms, each of which can consist of
1 to 16 outputs. Each room can have up to 10 presets.
• Room preset — A configuration consisting of outputs in a single room that has
been stored. When a room preset is retrieved from memory, it becomes the current
configuration for the outputs assigned to that room only (none of the other outputs
are affected).
• I/O Group — One of four possible subdivisions of the front panel matrix into smaller
functional sub-switchers. Inputs and outputs can be assigned to one of these groups
or not assigned to any group (see “
I/O Grouping ” on page 31).
Front Panel Controls and Indicators
All models of the DXP have the same front panel with the same controls and layout. The
front panel buttons are grouped into two sets, with the input and output buttons located
on the left side of the control panel and the control buttons on the right.
These illuminated push buttons can be labeled with text or graphics. You can set
the buttons to have amber background illumination all the time, or you can disable
the illumination (see “
Setting the Button Background Illumination ” on page 43).
Depending on the operation, the buttons blink or light steadily when pressed.
The front panel buttons have multiple functions. In the descriptions on the following
pages, primary functions are preceded by a square (
❏ ) and secondary functions are
preceded by a bullet ( • ).
DXP SERIES
DIGITAL CROSSPOINT MATRIX SWITCHER
CONTROL
ENTER PRESET VIEW ESC
INPUTS
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
OUTPUTS
CONFIG
1
2 3 6 5 4 7
I/O
VIDEO AUDIO
8 9
Figure 10. DXP Switchers Front Panel