Creating a global configurator project file, Step one: download device drivers, Step one: download device drivers. -2 – Extron Electronics IPL T PC1i Setup Guide User Manual
Page 13: Software setup
IPL T PC1 Interface • Software Setup
Software Setup
IPL T PC1 Interface • Software Setup
3-2
3-3
Creating a Global Configurator Project File
After you have installed the Global Configurator (GC)
application on your PC, follow the steps in this chapter to
download device drivers, create a GC project file, configure your
IPL T PC1 devices, and launch the GlobalViewer interface.
Numbers shown in pictures correspond to procedure step
numbers.
Step One: Download device drivers.
Software drivers for your audio/video devices are available at
no charge from the Extron web site, at www.extron.com.
To download device drivers,
1
.
On your PC, click Start > Programs > Extron
Electronics > GC2.3.0
, or double-click the
desktop GC 2 icon (shown at right) to launch the
GlobalViewer application.
2
.
Click the Add Driver Subscriptions button.
3
.
In the Available Manufacturers/Device Types section of
the Driver Subscriptions window, select a manufacturer.
4
.
Select a device type.
5
.
Click the Right Arrow (Subscribe) button.
6
.
Repeat steps 3 through 5 for each type of device you plan
to add to your audio/video network.
7
.
Click the Download button.
When the drivers have been downloaded, the Download
Complete dialog box opens.
8
.
Click the Close button.
9
.
Click OK.