Extron Electronics MTPX Plus 6400 Series Setup Guide - Manual (Page 27)

4. Press the keyboard <Enter> key. The switcher checks whether it is
password-protected.
If the switcher is not password-protected, it checks and
downloads the HTML start-up page. The switcher is ready for
operation via HTML remote control.
If the switcher is password-protected, it downloads the Enter
Network Password page.
NOTE: A User name entry is not required.
5. Enter the appropriate administrator or user password in the
Password field and click OK.
6. The switcher downloads the HTML start-up page. The switcher is
ready for operation via HTML remote control.
44 MTPX Plus 6400 • Remote Control and Optimizing the Video 45 MTPX Plus 6400 • Remote Control and Optimizing the Video