Extron Electronics MLC 104 SIS Programming and Control - Manual (Page 8)

SIS ™ Programming and Control, cont’d
MLC 104 Series • SIS ™ Programming and Control 5-8
PRELIMINAR
Y
Command/r
esponse table for SIS commands
Command
ASCII
(T
elnet)
URL Encoded (W
eb)
Response
Additional description
(host to switcher)
(host to switcher)
(switcher to host)
Input selection
Select an input
14, 22
X200
!
X200
%
21
Chn
X200
Select input
X200
(
X200
= 1, 2, 3, 4)
(audio and video)
.
14
= The MLC responds with an E14 err
o
r
code (invalid for this configuration) if the desir
ed input isn’t
part of the switching
rotation (is not set up to switch inputs). Events are still trigger
ed, though.
22
= The MLC sends a “busy” r
esponse (E22)
if switching functions are locked.
Display (pr
ojector) power
T
urn display power on
1P
1P
Pwr
X208
On (discrete).
T
urn display power of
f
0P
0P
Pwr
X208
O
ff (discr
ete).
V
iew display power status
P
P
X208
Show the display power status.
Example
:P
P
2
The display is powering off
.
Set power status
X208
*0P
X208
%2A0P
Pwr
X208
This command is used only by scripts. It p
rovides a way to set the power status to
match the actual state of the projector
.
For
X208
, 0 = display power is of
f
1 = display power is on 2 = display is powering down/off 3 = display is powering on (warming up).
Display mute
T
u
rn display mute on
1M
1M
M
u
t X216
Mute.
X216
= 0 (of
f), 1 (on), or 2 (unknown)
T
u
rn display mute of
f
0M
0M
M
u
t X216
Unmute.
V
iew display mute status
M
M
X216
Show display mute status.
Set mute status
X216
*0M
X216
%2A0M
M
u
t X216
This command is used only by scripts. It p
rovides a way to set the status to match the
actual state of the projector
.