Extron Electronics SW HDMI LC User Guide User Manual
Page 27
SW HDMI LC • Remote Communication and Control
21
Figure 18.
Firmware Upload in Progress
10.
When the firmware update is finished, “Completed” appears above the progress bar,
the Progress field displays “100%,” and the Status field displays “Completed.” Close
the Firmware Loader window.
Removing a device from the Firmware Loader
To delete a device from the Devices section of the Firmware Loader window without
uploading firmware to it:
1.
In the Devices field, click on the name of each device to be deleted, to highlight it. (To
select multiple devices, hold down the Ctrl or Shift key on your computer keyboard
while clicking on each device name.)
2.
Select Remove Selected Device(s) from the Edit menu or the pop-up menu
(displayed by right-clicking within the Devices field).
3.
On the Remove Device(s) window, select or deselect any devices on the list as desired,
then click Remove.
To remove all devices from the Devices field, select Remove All Devices from the Edit
or pop-up menu.
Changing the firmware file
To change the firmware file that will be uploaded to a device:
1.
In the Devices field, select the device for which the firmware file will be changed.
2.
Double-click on the firmware file name in the selected device row, or right-click on
the firmware file name and select New Firmware for Selected Devices from the
pop-up menu.
3.
On the Choose Firmware File window, browse to locate and select the firmware file
that you want to upload to the selected device.