IPX DDK-1200 - Manual (Page 71)

69
3. Device Setting: Provides four pages of settings.
(1) Device Setting page (2) Image Setting page
NOTE: The IP Surveillance software connects the Internet to an Ipxcam. There may be a
problem if the bandwidth is not enough, in which case the speed rate of the image
transmissions may become too low. So if you want a satisfactory speed rate in your displays,
you can click the “Device Setting” button, opening a “Device Setting” screen, and set the
settings of the Device page where you can change the “Audio Mechanism” function to “OFF”.
Turning it “OFF” will save the bandwidth from wastage, and improve the image display.
(3) Alarm Setting page (4) SD-card Setting page
NOTE: Please remember to click the “Apply” button to save the settings.
4. System Setting: Provides six pages of settings: the Global Settings, the Event
Notification, the Recording Settings, the Scheduler, the Sequence Views, the Speed
Dome and the Authority Setup.