IPX DDK-1200 - Manual (Page 84)

82
◇Set the PPPoE function
1. Click the network button in the home page.
2. Click the PPPoE button on the left side of the page to enter the “PPPoE SETTING” page.
3. Choose “ON” from the “PPPoE mode” list to activate it.
4. Enter the Account and the Password which are provided from your ISP.
5. Click the Submit button to submit the setting.
NOTE: Please refer to section 5.1.8 for more details.
◇Use the Sub Hostname to view the Ipxcam
1. Click the URL block at the top of the PC screen.
2. Type in the DDNS Host Name of the Ipxcam into the URL block and press the “Enter”
button to enter the login page.
3. Enter the user name and fill in the password.
4. Click the “OK” button and enter the home page of the Ipxcam.
Question 4:
How to add or modify the users and their authorities of using the Ipxcam?
◇Entering the setting page
1. Click the system button in the home page.
2. Click the Users button on the left side of the page to enter the “SYSTEM - USERS” page.
◇Add a new user
1. Please enter the user name, the password, the confirmed password and choose the authority.
There are three different levels of authorities, namely Admin, Operator and Viewer.
Admin: The user who accesses with the admin name and password has the full power to even
change the settings of the Ipxcam.
Operator: The suggested choice for normal use.
Viewer: The user who accesses with just the viewer name and password has only a limited
power to view.
2. Click the Submit button to submit the new user’s setting.