IPX DDK-1200 - Manual (Page 88)

86
APPENDIX 1. –SCANIP
Follow the instructions below to use the SCANIP software to search the Ipxcam devices from
a local location.
1. Click the button to discover the connection of the all-type device in the LAN. The
Device List will display the connection of the all-type device.
2. Select the desired device from the Device List.
3. Click the desired device to show the window while the Ipxcam information acts to
display the desired changes instantly.
4. Do you want to automatically search free IP?
If and when you want to automatically search the free IP, select “Yes” or “No”. If you click
“Yes” the software will provide the “Free IP Address” boxes on the right side of the
window. If you click “No”, these address boxes will not show.