Andrew James AJ000061 Sandwich Press - Manual (Page 6)

6
Before using the appliance
You must read all instructions carefully before using this appliance
1. Remove all packaging material and check to see that the sandwich press is in
good condition. The appliance must not have cracks on the unit and no
damage to the cord/plug. Do not discard any packaging until all accessories
have been found.
2. You must confirm that the voltage indicated on the sandwich press
corresponds with the voltage of the electrical plug
3. Remove any adhesive labels or stickers before use.
4. You should carefully wipe the exterior and the cooking plates with a warm,
soft, damp cloth to remove any dust that may have accumulated. Wipe dry
with a clean towel.
5. When using the appliance, provide adequate air space above and on all sides
for circulation.
6. Always use the sandwich press on a dry level surface.
Using your Sandwich Press to make sandwiches and cook meats
1. Lightly grease the cooking plates with a small amount of margarine or
cooking oil.
2. Always preheat the sandwich press before use.
3. Plug the sandwich press into the power supply. The red “power on” indicator
light will illuminate, allow the sandwich press to preheat in the closed
position until the green “working” indicator light illuminates.
4. When used for the first time, the sandwich press may give off a slight odour
and smoke haze. This is normal and is due to the initial heating of internal
components.
5. During this time, prepare the sandwich and place it onto the bottom cooking
plate. Always place sandwiches towards the rear of the bottom cooking
plate.