AAEON PFM-C20N User Manual
Page 33
Advertising
C AN B u s M o d u l e
P F M - C 2 0 N
Chapter 3 Driver Installation
3 - 8
checked.) can be keyed in “0~0x7ff.” The ID of Extended frame is
“0~0x1fffffff.” (The Extended frame can be selectable in “Peli” Mode
only.)
For RTR, please key in “0” or “1.”
For Data, you may key in “0~8 Bytes” and please fill out from the
“Byte 0” to “Byte 7” in order.
After filling, please click on “Send.” There is a pop-up to show if it
is a successful transmitting or not. Meanwhile, the “Monitor Port”
will receive the information you fill and show the related information
on “Monitor Port” window. You also can click on “Clean” to erase
all data you key in.
Advertising