ABUS FU8007 Secvest 2WAY Base Kit Installation - Manual (Page 38)

38
8.8 Connecting the analogue telephone connection
Connection instructions for ISDN / GSM / ethernet and GPRS modules can be found
in chapter 24. Connect the analogue telephone line as shown in the diagram:
A-B
Connection of an external
analogue line
In UK only
A1-B1
Connection of analogue
terminal devices (e.g.
telephone or fax)
8.9 Connecting external loudspeakers / microphones
In addition to the internal loudspeaker and microphone, a further loudspeaker /
microphone can be connected to the wireless alarm centre as shown in the diagram.
8.10 Inserting the rechargeable batteries for emergency power supply
Insert the six batteries correctly into the compartment. Replace the batteries every
two years at the latest with batteries of the same type. Only use batteries with the
following specifications:
1.2 V, 2100 mAh, NiMH, AA/R6 type
Battery charging:
A battery that is new or has not been used for a longer period does not
develop its full capacity until after approximately 5 charging and
discharging cycles.