Aeromotive 11108 - MARINE A1000 FUEL PUMP - Manual (Page 3)

6. Using AN-10 fuel line, connect the fuel pump outlet to the 12301 fuel filter. You can attached the filter
directly to the fuel pump utilizing an AN-10 fitting (15608) and 2 sealing o-rings (10AN o-ring pack
15623). Make sure you use high pressure (150 psi minimum) fuel line for this connection!
7. Using AN-08 or AN-10 fuel line, connect the fuel filter outlet to the “Y” block (15620, 15675 or 15674).
From the “Y” block use AN-08 lines to make the connection to the fuel rails. Make sure you use high
pressure (150 psi minimum) fuel line for this connection! For optimum fuel system performance
in EFI applications, Aeromotive recommends a balanced system with the fuel pressure regulator as
the last component in the system as shown in the following diagram.
Note: Be sure to route all electrical wires clear of any moving suspension or drivetrain
components and any exhaust components! Protect wires from abrasion and road obstructions or
debris.