Aeromotive 18673 - A1000 CAMARO STEALTH KIT - Manual (Page 6)

17. Now the fuel pump is ready to install in the tank. The siphon connection has to be made as the fuel pump is being
lowered into the fuel tank. FIGURE 1-7. NOTE: Bend the flex hose with the orange check valve on the
Aeromotive pump assembly, so it points toward the float level.
FIGURE 1-7
18. Use the positioning marks on the pump to align the unit. FIGURE 1-8. Replace the lock ring on the top of the fuel
pump assembly and rotate it to the “locked” position. If re-using the factory feed line, attach it to the Aeromotive pump
at this time. NOTE: You must install a by-pass style regulator with return line in order for the fuel pump to
function correctly. Failure to do so will result in poor performance and fuel pump/system failure.
FIGURE 1-8