Aeromotive 18673 - A1000 CAMARO STEALTH KIT - Manual (Page 8)

22. Now the fuel tank is ready to be installed in the vehicle. Attach the return line to the Aeromotive top plate before
installing the tank (15605 for the 18673 and 15607 for the 18674). Coil the return line up to keep it out of your way.
Take the supplied fuel tank spacers and place them between the tank straps and body. See FIGURE 1-13.
FIGURE 1-13
23. Now reverse steps 12-1 to finish up the tank installation.
24. Route the return line under the vehicle noting to keep it away from heat and moving suspension components.
25. Find a suitable place in the engine bay to mount a return style regulator. Plumb the regulator per the manufactures
installation instructions.
26. Key on to check for leaks and to set fuel pressure. If any leaks are found, immediately discontinue use of vehicle and
repair the leak(s)! This finishes up the installation of your new Aeromotive Stealth fuel pump.