American Expedition Vehicles Brute Frame - Manual (Page 14)

Page 14 of 20
firmly in place and mark the weld areas as shown on the extension and frame. Remove the
fishplate and prepare the areas to be welded by removing the e-coat on both the frame and
the fishplate. Weld in the positions shown. Using the fishplate as a drill guide, drill the fuel
rail bundle clip holes through the frame.
5. Prime and paint the frame. Use high quality primer and chassis paint. We recommend
always using a catalyzed primer and paint.
6. Install the fuel rail bundle. Use the new fuel and brake line provided in the kit. Use high
quality tubing for any vapor or air lines.