American Expedition Vehicles Brute Frame - Manual (Page 17)

Page 17 of 20
2. Temporally mount the rear frame extension to check fit. Using eight 1/2” bolts and the
fishplates, bolt the rear frame assembly to the frame. Using C-Clamps, adjust the Rear
Frame Extension so that the measurements are as shown in the frame measurement
diagram above. Clamp the Rear Frame Extension at the winch mount to the crossmember.
3. Check the location. Using a long straight edge, check the height locations of the body mount
surfaces as shown. Check for squareness and overall length. Once you are satisfied with
the position of the Rear Frame Extension, clamp everything down tightly and re-check all
your measurements.