Antex Electronics DMX8 USB Mixer - Manual (Page 9)

Installing the DMX8 USB Mixer
Note:
!
When you insert the DMX8 USB Mixer CD, the Setup program will determine if
your system meets the minimum software requirements for this product.
If your system does not meet these requirements, the Setup program will provide onscreen
instructions advising which software or upgrades are required. Make sure to print out the
instructions, as you may need to use these as a reference during the installation procedure.
Installation
The DMX8 USB Mixer is supplied with a CD containing drivers, a configuration
program, a meter program and an electronic version of this guide. The following steps
detail the procedures for installing the software.
Please Note: It is important to turn the mixer off before commencing
installation.
Installing the DMX8 USB Mixer software
1. Insert the installation CD into your CD-ROM drive. If the autorun does not start,
double-click DMX8Setup.exe
Page 5