Atec Agilent-J2300E - Manual (Page 31)

31
Top Talkers
Top Talkers determines which IP and IPX users consume the most Frame Relay
bandwidth. With the Agilent Advisor, 256 top talkers are identified. Figure 14
depicts a typical top talker screen.
The following values are displayed:
• Sorted IP and IPX source and destination statistics
• Traffic identified as DTE or DCE (CPE or Network)
• Throughput in kb/s
• Frame rate and percentage (%) utilization
Samples from 2 seconds to 24 hours
Specified periods by hours, minutes and seconds
Updated measurement results every 2 seconds
Figure 14: Top Talkers.
Frame Relay (continued)