Atec Agilent-J2300E - Manual (Page 52)

52
The Advisor WAN provides run-time and post processing display of the
following decodes according to Bellcore TR-TSY-00772, 00773 and 00774
specifications:
•Layer 1 PLCP
•Layer 2 PDU
•Layer 3 SMDS header
The following encapsulated protocols are decoded:
•Frame Relay
•X.25
•HDLC
•IP
•SNAP
ATM DXI monitoring on V.24/V.28/RS-232C, RS-449/V.36, V.35, T1, E1, E3, DS3,
HSSI
V5.1 and V5.2 are interface standards defined by the European
Telecommunication Standard Institute (ETSI) for interfaces between an Access
Network (AN) and the Local Exchange (LE). The Advisor WAN provides V5.1/
V5.2 monitoring capabilities.
•Layer 2 LAPV
•Layer 3
SMDS (Optional)
ATM DXI
V5.1/V5.2 Monitoring
The Serial Link Internet Protocol (SLIP) monitoring application allows
Serial Link IP analysis (see figure 24).
The following functionalites are supported
•Capture filter
•Display filter
•Searching
•Decodes
•Statistics
Note: This functionality can only be used with the V-Series interfaces in the
mainframe, not with the High Speed V-Series interface J5457A. One of the
J229XD T1/E1 modules needs to be inserted when using this SLIP
application.
SLIP