Avision AV810C+ User Manual
Page 20
Advertising
2-12
Windows NT 4.0
1.
Press Start>Setting>Control Panel. And choose “SCSI Adapter”
from the Control Panel menu. The “SCSI Adapter” dialog box is
displayed. Choose Driver.
2.
Choose “Add” and “Select manufacturer and SCSI adapter”.
3.
Select “Adaptec” as the manufacturer and “AIC-6X60 ISA Single
Chip SCSI Controller” as the adapter and then Confirm.
4.
Follow the on-screen instruction to complete the installation.
5.
Restart your Windows NT 4.0.
2.
6.1.2 OTHER SCSI CARDS
If you purchase your SCSI card separately from the scanner, then please
follow the installation instruction provided by your SCSI card supplier.
2.
6.2 MAC USER
The Mac system already has SCSI controller built in. Connect the
system, therefore, set a different SCSI ID for each SCSI device.
Advertising