Avision AV810C+ - Manual (Page 9)

2-1
2.
SCANNER INSTALLATION
2. 1 PRECAUTIONS
v
Keep the scanner out of direct sunlight. Direct exposure to
the sun or excessive heat may cause damage to the unit.
v
Do not install the scanner in a humid or dusty place.
v
Be sure to use the proper AC power source.
v
Only use the AC adapter (model name SA60-24 made by Sino
America) included with the machine. Using other AC adapters may
damage the machine and therefore void the warranty.
v
Place the scanner securely on an even, flat surface. Tilted or
uneven surfaces may cause mechanical or paper-feeding problems.
v
Keep the shipping box and the material in case you may need to
ship the scanner again.
2. 2 SCANNER UNPACKING
Please unpack the scanner carefully. If any item is missing or damaged,
please contact your authorized Avision dealer immediately.
Remove the shipping retainer:
1. Place the scanner on its side as shown to reveal the shipping
retainer as shown in Figure 2-1.
2. Unscrew the retainer screw.
3. Pull out the shipping retainer and put it in the “use position”(See
Figure 2-2) and secure it with the screw.
4. Lay down the scanner on the desk for normal operation.