Avision AV810C+ - Manual (Page 55)

5-4
5. 3 REPLACING THE ADF DETACHABLE PAD
MODULE
After scanning approximately 150,000 pages through the ADF, the pad
spring may be worn out and you may experience problems with
document feeding. In this case, it is highly recommended to replace
the pad module with a new one. For ordering the pad module, please
consult your nearest dealer and follow the procedure in below to
replace it.
Removing Procedure
1. Open the ADF front cover by depressing the ADF release button.
2. Use your fingers to hold the ADF detachable pad module and pull
it out as shown in Figure 1.
Figure 1 Remove the pad module
ADF Release Button