Avision AV880C - Manual (Page 19)

2-12
Windows NT
1. Press Start>Setting>Control Panel. And choose “SCSI
Adapter” from the Control Panel menu. The “SCSI Adapter”
dialog box is displayed. Choose Driver.
2. Choose “Add” and “Select manufacturer and SCSI adapter”.
3. Select “Adaptec” as the manufacturer and “AIC-6X60 ISA
Single Chip SCSI Controller” as the adapter and then
Confirm.
4. Follow the on-screen instruction to complete the installation.
5. Restart your Windows NT.
2.6.1.2 OTHER SCSI CARDS
If you purchase your SCSI card separately from the scanner, then
please follow the installation instruction provided by your SCSI card
supplier.
2.6.2 MAC USER
The Mac system already has SCSI controller built in. Connect the
system, therefore, set a different SCSI ID for each SCSI device.