Avision AV880C - Manual (Page 41)

5-4
5.3 REPLACING THE ADF DETACHABLE PAD
MODULE
After scanning approximately 150,000 pages through the ADF, the
pad spring may be worn out and you may experience problems
with document feeding. In this case, it is highly recommended to
replace the pad module with a new one. For ordering the pad
module, please consult your nearest dealer and follow the
procedure in below to replace it.
Removing Procedure
1. Open the ADF front cover by depressing the ADF release
button.
2. Remove the ADF detachable pad module by pulling out the
upper part of the pad clamp as shown in Figure 1.
Figure 1 Remove the pad module
ADF release
button
ADF
cover
ADF
unit
Upper part of
the pad