Avision AV6240 User Manual
Page 42
b
(9)
The "click the manufacturer & model of your hardware" dialog
box will be displayed. Choose current SCSI manufacturer and
model and then press Next. Follow the subsequent procedure as
indicated to complete the installation and to restart Windows 95.
(10)
If current manufacturer and model are not listed in the selection
box, press Have disk button. The "Have disk" dialog box will be
displayed. Type d:\DTCSCSI in the path box(d is the letter
indicating
your current CD-ROM drive). Choose Confirm and
follow
the subsequent procedure as indicated on the screen to
complete the installation.
(11)
The "Finish" dialog box will be displayed. Choose Finish and
then choose Restart the Windows 95.
In Windows 3.1, please:
(4)
If your SCSI card is bundled with Avision AV260CS, then install
the scanner driver will simultaneously install the SCSI card driver.
(5)
If your SCSI card is not bundled with Avision AV260CS, then
please follow the installation sheet contained in your SCSI card.
In Windows NT, please:
(5)
Click Windows Start icon from the bottom. Choose Setting.
Choose Control Panel from Setting.
(6)
Choose SCSI Adapter from the Control Panel. The " SCSI
Adapter" dialog box will be displayed. Choose Driver.
(7)
Choose Add and select manufacturer and SCSI adapter
(8)
Choose Have disk if your SCSI card manufacturer and SCSI
adapter is not listed in the selection box. Type d:\DTCSCSI (d
representing the letter of your current CD-ROM drive) and choose
Confirm.
(9)
Follow the subsequent procedure on the screen to complete the
installation.
When the "System Setting Change" dialog box appears, choose OK to
restart Windows NT.