Avision FB6080E (DT-0602S) - Manual (Page 11)

2-2
2.2 UNLOCKING YOUR SCANNER
To protect the scanning unit from damage during
transportation, a lock switch is designed at the back of the
scanner to keep the scanning unit from moving. To unlock
the scanner, move the lock switch up as shown in Fig. 2-1.
Figure 2-1 Unlocking the Scanner
Figure 2-2 Home position
Note: If the scanning unit is not located at the front of the
scanner before transporting the scanner, be sure to do the
follows:
1. Turn on the scanner.
2. The scanning unit should move to the front of the
scanner.
3. Press the lock switch down to the “Lock position”.
4. The scanner is now ready to transport.
Unlocked
Locked
Scanning unit at this
position before
locking the scanner