Avision FB6080E (DT-0602S) - Manual (Page 72)

8-1
8.
TROUBLESHOOTING
If you have problems with the operation of your scanner,
please check the following troubleshooting hints.
8.1 FREQUENTLY ASKED QUESTIONS
Question: When the scanner is powered on, it makes
noises and won’t stand ready.
Answer: There are two possibilities:
1) You might fail to push the scanner shipping
lock to its “use” position. If this is the case, pull
the scanner status switch to its “use” position
first.
2) The scanner is not placed on an even, flat
desktop surface. This may cause the scanner to
malfunction.
Question: The scanner is powered on, but the lamp does
not light up.
Answer: The lamp is probably out of order. Contact your
local dealer or distributor to replace the lamp.
For your information, the average life time of the
lamp is about 15,000 hours and the operating
temperature for the scanner is between
10°C(50°F)
and 40°C(104°F).