Avision FB6080E (DT-0602S) - Manual (Page 70)

6-7
5. Check if the number displayed in the LCD screen is
your favorable setting for the scanned image.
6. Press the Scan button on the scanner.
7. When the scanner completes first-page scan, a
“Continue or stop” dialog box appears.
8. Place next page of your document on the glass.
9. Choose “Continue” or simply press the Scan button on
the scanner to scan next page.
10. If your scan is completed, click “Stop” to close the
dialog box.
Note:
1. The scanner is designed to automatically set your scan
source. If your scanner is equipped with both the
auto document feeder and the flatbed, the scanner
can automatically set your scan source whenever
there is paper on the source. However, if there is
paper on both the auto document feeder and the
flatbed, the scanner will set auto document feeder to
be the scan source.
2. If you choose to perform flatbed scan, the scanner can
still perform “automatic crop” and “deskew” for the
scanned image. However, the “Multi-feed Detection”
and “Duplex” functions will be disabled.