Avision IS15 (FS-0913B) - Manual (Page 26)

Question: The scanned image is cut off when I scan dark or night
pictures.
Answer: Please insert your photo to the white plastic sheath to get a
complete image.
Question: The scanner feels warm to the touch.
Answer: It is normal for the scanner to emit a small amount of heat (around
30-45 Celsius) after prolonged use. However, if there are strange
odors coming from the scanner or the scanner feels hot to the
touch, disconnect the scanner immediately from the power supply
or the computer.
7.2 The indicator light pattern
The indicator light patterns represent function status as follows:
Light Description
Steadily on
The scanner is ready for use.
Blinks
continuously
ƒ Initializing system and memory card.
Please wait until the initialization
process is complete before using the
scanner.
ƒ Busy scanning and storing image files.
Please wait until the process is complete
before scanning another original.
ƒ Sensor cleaning in progress. Please wait
until the process is complete before
performing any operations.
2 Blinks
Paper jam. Press the Function button for
about 0.5 seconds; the scanner will back
out the original so you can remove it from
the input slot.
3 Blinks
Memory card error. Remove the memory
card to clear this error status.
4 Blinks Calibration failed. Error indication only.
5 Blinks
Scan To PC failed. The PC may be busy or
unavailable.
7-2