3 14binserting a memory card or a usb flash drive, Turning on the scanner -7, Scanning an original -7 – Avision IS25 manual User Manual
Page 23
Advertising
3.4
Turning on the scanner
1.
Move the POWER knob to any number between “1”
and “5” to turn on the scanner.
The System
LED
2.
The System LED will be first lit in red and then lit in
green steadily. This indicates the scanner is in ready
status.
3.5 Scanning an original
1.
To start easy mode to save your images to your SD
card or USB flash drive, please turn the operation
mode to “SC/Flash” at the rear of the scanner as
indicated.
3-7
Advertising