3 loading a card to the paper feed slot, 3 loading a card to the paper feed slot 4-8 – Avision IS25 manual User Manual
Page 38
Advertising
4.2.3 Loading A Card to the Paper Feed Slot
1.
Place the card face up with the long dimension parallel
to the paper feed slot and make sure the top of the
card points to the paper feed slot.
2.
Align the original to the left side of the paper feed slot.
Note:
This scanner is able to scan plastic ID cards from the front
input tray. Plastic ID cards up to 0.8 mm thick.
4-8
Advertising