Avision IS25 manual User Manual
Page 82
Detection Area
This option allows you to specify a multi-feed detection
area.
To specify a multi-feed detection area,
1.
Choose Disable from the Intelligent Mode. The
Detection Area will be enabled.
2.
Choose Inside the Range or Outside the Range. The
detection area will be highlighted.
3.
Drag your mouse pointer on the top or the bottom of
the detection area to specify your area in the display
window. Or you may use the up and down arrow key of
the Top and Bottom to change its size. The Top
indicates the starting position of the detection range.
The Bottom indicates the ending position of the
detection range. Note the top value and the detection
range has to be at least 1 inch.
Detection Area: Inside the Range, Box, Top: 3”, Bottom: 7”
5-38