Avision DS320F (DF-0707S) - Manual (Page 12)

2-5
2.4 Connecting the ADF Cable
Note: This section applies only to the product with an automatic document
feeder.
Connect the ADF (Auto Document Feeder) cable (attached to the document
cover) to the ADF port at the back of the product.
2.5 Connecting the Printer Cable
Note:
If you wish to use the product as a regular copier, you need to connect the
product with a printer through a printer cable.
The following picture of the one with an automatic document feeder is
conveniently demonstrated for both the products with or without an automatic
document feeder.
1. Connect one end of the printer cable to the printer.
2. Connect the other end to the Copy port at the rear of the product.
The ADF
Cable
Printer Cable
Copy Port