Avision DS320F (DF-0707S) User Manual
Page 43
6-2
Question: The scanned image always comes out to be too dark.
Answer:
1) Use your application to modify the Gamma setting to 2.2 and 1.8
for your printer and monitor respectively.
2) Adjust brightness setting from the TWAIN interface to get a
brighter image.
Question: The product works well except for the line art, the lines of
which seem much thicker than the original.
Answer:
Increase the Brightness or adjust the Threshold setting to adjust
the line art image.
6.2
Clearing a Paper Jam
In the event of a paper jam, follow the procedures below to remove the paper:
1.
Turn the product off by disconnecting the power cable.
2.
Gently open the ADF front cover to the left.
3.
Carefully pull the paper out of the ADF unit.
4.
Close the ADF front cover.
5.
Turn on the product by reconnecting the power cable. The product is
now ready to use.
ADF Front
Cover