B&K Precision 879B - Manual - Manual (Page 41)

39
The four menu options allow users to control the beep
sound setting (bEEP), auto power off setting (AoFF),
power-up state settings (PuP), and resetting
instrument to default settings (dEF).
By default, the first option after entering the utility
menu is “bEEP”. The primary display indicates the
menu option, and the secondary display indicates the
current settings or parameters configured for the
selected option. To change the settings or
parameters, use the and arrow keys. To
change or select a different menu option, press the
button once. For each button press, the
meter will traverse through each menu options and
will repeat itself in the following order:
bEEP AoFF PuP dEF
Note: The settings and parameters are temporarily
“remembered” once the
button is pressed to
select a different menu option. To save all settings
permanently, exit the menu using the save and exit
method. With the exception of “ bEEP” and “AoFF”
settings, in which case under these settings, changes
are temporarily saved even when exiting the menu
without saving. (See “Exit Utility Menu” section for
details).