B&K Precision 2658A - Manual - Manual (Page 78)

72
44) Setting unit of marker
Command : CONV* * *
( * * *: DBM / W / DBV / V / DBUVM / VM)
Example: CONVDBUVM
Query: CONV?
45) Request print on printer
Command : PRTSIW
USB printer connected to USB A plug prints.
46) Request for transfer of spectrum
Command : SRS* * * *
( * * * *: CURR / 000 to 199)
Example: SRSCURR
*The number of the commands is given to the saved file.
*Refer to “25.7 Transfer of Spectrum Data” for the returned data.
47) Request for transfer of spectrum in USB memory
Command : SRSU* * * *
( * * * *: 000 to 199)
Example: SRSU111
* The number of the command is given to the saved file.
* Refer to “25.7 Transfer of Spectrum Data” for the returned data.
48) Request for transfer of spectrum data of 1001 points
Command : SRSF * Refer to “25.7 Transfer of Spectrum Data” for the returned
data.
49) Request preset
Command : PRESET
50) Setting remote control
Command : REMOTE* * *
( * * *: ON / OFF)
Example: REMOTEON
Query: REMOTE?
Command Unit of marker
DBM dBm
W W
DBV dBV
V V
DBUVM
dBμV/m
VM V/m
Command Transferred spectrum
CURR Current spectrum
000 Spectrum data of 000
· · · · · ·
199 Spectrum data of 199
Command Transferred spectrum
000 Spectrum data of 000 in USB memory
· · · · · ·
199 Spectrum data of 199 in USB memory
Command Remote control
ON
Operation by function key and encoder cannot be done.
Control the unit with USB commands.
OFF
Operation by function key and encoder can be done.
USB commands are available