BlueBird CL550A - Manual (Page 11)

11
Movement/Transport
• To turn and steer the machine, unlock wheels
and pull by handle.
• Turn off the engine and allow it to cool at least 2
minutes before transport.
• Collapse the handle if the machine is equipped
with a collapsible handle.
• Be careful and use safe lifting and moving
techniques when loading/unloading the
machine.
• We recommend having two people to lift the
machine.
• Fasten the machine properly in place with
approved fasteners, such as tension belts,
chains or rope. Always check that you are in
compliance with applicable traffic regulations
before transporting the machine.
• Check the fuel level before each use and leave
space for the fuel to expand, because the heat
from the engine and the sun can otherwise
cause the fuel to expand and overflow.
• Avoid overfilling. If you spill gasoline on the
machine, wipe up the spill and wait until it has
evaporated before starting the engine. If you
spill gasoline on your clothing, change your
clothing.
SAFETY INSTRUCTIONS
Maintenance
• Keep machine, attachments, and accessories
in safe working condition.
• Check shear bolts, engine mounting bolts, and
other bolts at frequent intervals for proper
tightness to be sure the equipment is in safe
working condition.
• Never make adjustments with the engine
running.
• Disengage the drive units, shut off the engine
and wait until all moving parts come to a
complete stop before making adjustments,
performing maintenance or cleaning the
machine.
• Disconnect the spark plug cable before
beginning repair work.
• Keep all components in serviceable condition
and make sure all nuts, bolts, etc. are tight.
Replace worn or damaged decals.
• Be careful when checking work tools. Use
gloves when performing maintenance work.
• Never allow persons not trained in the use of
the machine to perform service on it.
• Always park the machine on even ground before
performing maintenance or making
adjustments.
• Do not disassemble the engine. This can
invalidate your engine warranty. Contact your
dealer if you have any questions regarding
service or warranty matters. Follow all
maintenance instructions.
• Do not change the setting of governors and
avoid running the engine with overly high RPM.
If you run the engine too fast, you risk damaging
the machine components.
• Do not modify safety equipment. Check
regularly to be sure it works properly. The
machine must not be run with defective or
disassembled safety equipment.
• The muffler is designed to maintain sound levels
at an approved level and keep direct exhaust
away from the user. Exhaust gases from the
engine are extremely hot and may contain
sparks that can cause fires or burn the user.
• Never use a machine with a defective muffler.
• Reduce the risk of fire by removing grass,
leaves and other debris that may have caught
in the machine.
Disconnect the spark plug cable before repair work.
8011-027