Troubleshooting – BlueBird CL550A User Manual

Page 21

Advertising
background image

21

TROUBLESHOOTING

Symptom

Cause

Action

The engine will not start

• User error

Fuel valve closed.

Open the fuel valve.

Choke valve open.

Close the choke with cold
engine.

Operator presense switch not held down.

Move to operator position and hold down.

Engine switch in OFF position.

Turn the engine switch to ON.

• Fuel system

Fuel tank empty.

Fill with fuel.

Machine stored without

Clean tank, sludge reservoir and

observing proper procedure

empty carburetor.

from chapter ”Storage/Winter

Fill the tank with fresh fuel.

storage”

Contamination, water or ice in

Clean tank, sludge reservoir,

fuel system.

fuel lines and carburetor. Fill
the tank with fresh fuel.

Carburetor problems.

Contact an authorized service
workshop.

• Spark plug

Wrong spark plug type.

Replace the spark plug.

Build-up on electrodes.

Check electrode gap and clean or

Short circuit.

replace spark plug.

Gasoline or oil on the spark plug.

Clean the spark plug. Air the
engine out. Start with full throttle.

• No spark after

Faulty engine switch, cable

Contact an authorized service

checking spark plug

or ignition.

workshop.

• Low compression

Serious interior engine

Contact an authorized service

damage or faulty valves.

workshop.

Engine is under powered or runs unevenly

• Air filter

Clogged air filter.

Clean or replace the air filter.

• Fuel system

Machine stored without observ-

Clean tank, sludge reservoir and

ing proper procedure from

empty carburetor.

chapter ”Storage/Winter storage”

Fill the tank with fresh fuel.

(Blue exhaust)

Tank filled with 2-cycle mixed oil.

Fill the tank with proper fuel.

(Voluminous blue-white

Tank filled with diesel.

Clean tank, sludge reservoir

exhaust)

and empty carburetor.
Fill the tank with proper fuel.

(Black exhaust)

Choke left on.

Open choke valve.

Clogged air filter.

Clean or replace the air filter.

Carburetor problems.

Contact an authorized service
workshop.

• Ignition system

Wrong spark plug type.

Replace the spark plug.

Build-up on electrodes.

Check electrode gap and clean or

Short circuit.

replace spark plug.

Faulty ignition unit.

Contact an authorized service
workshop.

• Low compression

Serious interior engine damage

Contact an authorized service

(possible blue exhaust)

or faulty valve.

workshop.

Advertising
This manual is related to the following products: