BlueBird S22S6DA_968999681 - Manual (Page 14)

14
SAFETY INSTRUCTIONS
Disconnect the spark plug cable before repair work.
Maintenance
• Never make adjustments with the engine running.
• Disengage the drive units, shut off the engine and
wait until all moving parts come to a complete
stop before making adjustments, performing
maintenance or cleaning the machine.
• Disconnect the spark plug cable before beginning
repair work.
• Keep all components in serviceable condition and
make sure all nuts, bolts, etc. are tight. Replace
worn or damaged decals.
• Be careful when checking work tools. Use gloves
when performing maintenance work.
• Never allow persons not trained in the use of the
machine to perform service on it.
• Always park the machine on even ground before
performing maintenance or making adjustments.
• Do not disassemble the engine. This can
invalidate your guarantee. Contact your dealer
if you have any questions regarding service
or guarantee matters. Follow all maintenance
instructions.
• Do not change the setting of governors and avoid
running the engine with overly high RPMs. If you
run the engine too fast, you risk damaging the
machine components.
• Do not modify safety equipment. Check regularly
to be sure it works properly. The machine must
not be run with defective or disassembled safety
equipment.
• The muffl er is designed to maintain sound levels
at an approved level and keep direct exhaust
away from the user. Exhaust gases from the
engine are extremely hot and may contain sparks
that can cause fi res or burn the user.
• Never use a machine with a defective muffl er.
• Reduce the risk of fi re by removing grass, leaves
and other debris that may have caught in the
machine.
Keep the machine clean.
WARNING!
Wait until all moving parts are completely
still before performing maintenance on
the machine.
Turn off the engine and remove the spark
plug cable.
8011-027
8011-121-1