BlueBird S22S6DA_968999681 - Manual (Page 34)

34
Action Date, stamp, signature
SERVICE JOURNAL
Delivery service
1. Break the packaging and make sure the machine has not been
damaged in transport.
2. Where applicable, assembly accompanying components.
3. Check that the machine design corresponds to the
customer order.
4. Check that the right amount of oil is in the engine and
transmission.
5. Check that the working equipment is properly set.
6. Check that the drive pulleys are aligned.
7. Check that belts are properly adjusted.
8. Lubricate the machine as described in the lubrication schedule.
9. Fill the fuel tank and start the engine.
10. Check all operating instruments.
11. Check decals and information attached to the unit.
12. Check the engine speed (RPM), see Technical Data.
13. Check for leakage.
14. Inform the customer about:
The need and advantages of following the service schedule.
The need and advantages of leaving the machine for service
every 300 hours.
The effects of service and maintaining a service journal on the
machine’s resale value.
15. Fill in the sales papers, etc.
Delivery service has been
carried out.
No remaining notes.
Certifi ed:
After the fi rst 20 hours
1. Change engine oil.
2. Check that belts are properly adjusted.
3. Tighten screws and nuts.