BlueBird S22S6DA_968999681 - Manual (Page 26)

26
LUBRICATION
Lubrication schedule
General
Stop the engine and remove the ignition cable before attempting to lubricate the machine.
Wipe away excessive grease after lubrication.
It is important to avoid getting lubricant on the belt or the drive surfaces on the belt pulleys. Should this happen,
attempt to clean them with spirits. If the belt continues to slip after cleaning, it must be replaced.
DT04-1
1. Check engine oil daily, change every six months or 100 hours.
2. Check and lubricate wheel bearings once a month.
3. Lubricate folding handle points once a week.
4. Lubricate main shaft bearings once a week or every 40 hours.
1
2
3
4
3
4