Brown Products EdgeMaster (E-104H, E-104H5.5) - Manual (Page 17)

PAGE 11
SERVICE
1. ENGINE SERVICE
A. See owner’s manual for service, maintenance require-
ments and procedures for engine.
2. EDGER SERVICE
A. Check all nuts and bolts for proper tightness before initial
operation and periodically thereafter.
B. Check blade periodically. If worn excessively, replace.
C. Check belt for wear. If necessary, replace.
D. Check tension on belt and adjust if necessary.
WARNING! MAKE CERTAIN THAT BLADE BOLT AND
NUT ARE TIGHT AND IN GOOD CONDITION. INSPECT
FREQUENTLY.