Brown Products EdgeMaster (E-104H, E-104H5.5) - Manual (Page 24)

PAGE 17
STEP 6 : (cont.)
Adjust the control rod ends as necessary to maintain the bottom of the front
belt guard to be no less than 3/8” above the ground. (Be sure the idler pul-
ley is still not touching the belts.) After adjustment, tighten the lock nuts
on the rod ends and the bolts securing the rod ends to the machine.
STEP 7 :
Add unleaded gasoline and oil as directed in the engine manual. Read en-
gine and EDGEMASTER operating instructions before operating.