Brown Products BrushOx (BC2613HER) - Manual (Page 28)

28
Assembly Instructions
1. Detach and remove the handle and tires from the unit on the pallet.
2. Mount rear drive wheels on axle. Place one shim washer between wheel and axle
housing, and one between wheel and E-Clip. Apply anti-seize compound to axle
before installing wheel. (See Illustration A Below)
Illustration A
3. Mount handle in either high or low mounting position, using 3/8” x 1 ½” serrated
flange bolts. (See Illustration B Below)
Illustration B